折彎機安全解決方案,DSP折彎機,諾亙供

DSP激光安全保護裝置保護了折彎機操作工人身安全，避免了由于機床上滑塊的快速運行而產生的危險。保護區域固定在刀尖下方并隨著模具同步運動，確保了模具高速下行時下面的任何物體在接觸刀尖前必*入  DSP  產生的保護區域。一旦有遮擋物  （如工人手指）進入  DSP  保護區域，DSP會立即發出信號并中斷滑塊的下行動作。

● CLASS 1M塊狀激光發射器

● 安全等級達CAT.4以及SIL3   

● 符合歐洲CE認證

● 防護等級IP65                                                                                                              

● 系統響應時間為5MS

● 防護距離比較大可達15M

● 配有LED指示燈顯示各種狀態    

● 具備停止距離檢測功能   

● 保護刀尖的前、中、后防護區域，可屏蔽前、后防護區域 達到折盒子功能。                                                                   ● 屏蔽點可手動隨意調節確定，設置方便并提供持續監控。

● 保護區域固定在刀尖下方并隨著模具同步運動，確保了模具高速下行時下面的任何物體在接觸刀尖前必*入  DSP  產生的保    護區域。一旦有遮擋物  （如工人手指）進入  DSP  保護區域，DSP會立即發出信號并中斷滑塊的下行動作。

● 安裝支架：鋁型材支架，可便捷安裝，多個方位可調節，配備刻度尺，可根據模具不同的高度調整光幕的位置。

DSP LASER safety device replaces DFS LASER BEAM and it is better both for its functionality and its use simplicity.

DSP LASER protects the pressbrake operator from the danger of crushing that can take place accidentally between the moving part of the machine and the fixed one. The project idea used for this device is the one to fit out the moving pert of the pressbrake with a protection zone. This is a volume of suitable and special dimensions generated by DSP LASER and placed under the upper tool vertex at a higher distance than that the machine requires to stop.

So the protection zone, that moves together with the mobile part because integral with it, advances the race of this one towards the fixed pert.

An obstacle (for example the Operator fingers) when entering the protection zone. Is detected immediately causing consequently the interruption of the mobile part motion.

As the detection takes place at a higher distance than that the machine requires to stop, the crushing possibility between the two tools may be excluded.

This idea of protection , in addition to be in compliance with what is requested by the latest and more up-to-date version of specific regulations of the pressbrakes EN 12622, makes the machine safe for the operator as requested by the dispositions of the 《Machine rules》.

DSP LASER system is a solution for the pressbrake safety, specifically designed for this machine , it is for this that it assures to carry out the machine working cycle penalizing its execution time in the least.